New Update Available

Phase Combined IBUC

For serial numbers beginning with TEPA & TEBD only

Version: V0_10 for PAA – On TEPA series only

Release Date: November 24th, 2023

Version: V0_05 for LPBUC – On TEBD series only

Release Date: August 14th, 2023

PAA Update | TEPALPBUC Update | TEBD
PAA | TEPA
  • Updated networking stack.
  • Restored burst thresholds on reboot.
  • Delay TX enable for 30 seconds on reboot.
  • Adjust SPI bus timing for better DAC stability.
LPBUC | TEBD
  • N/A
PAA | TEPA
  • N/A
LPBUC | TEBD
  • Fixed bug: SNMP traps occasionally not being sent.

Cyber Hardened

New Update Available!

IBUC 2 | 2e | 2G | R | G

For serial numbers beginning with TE81 only.

Version: V0_49

Release Date: November 21, 2023

Update
  • TX Redundant System
  • Improved session management
  • Correcting ct8
  • Bugs fixed on calibration procedure.

New Update Available!

IBUC 2 | 2e | 2G | R | G | 3 | 3G

For serial numbers beginning with TE80 & TE90 only.

Version: V5_51

Release Date: October 12th, 2023

Warning: Products running firmware V5.44 or greater cannot be downgraded to any version before V5.44

Update
  • The firmware is a maintenance release that adds the ability to configure new unit types. Existing units in the field are not affected by this release.
  • N/A

New Update Available!

TXI Interface Controller For Tx 1:2 Redundant Systems

For serial numbers beginning with TE12 only.

Version: v01.02

Release Date: April 11th, 2025

Warning: This Firmware is only applicable to the TXI controller and is not compatible with other products.

TXI Update
The new firmware;
  • Brings significant improvements and adds bug fixes, performance improvements, a new UX layout, new features and enhancements, and slightly faster performance.
  • Is recommended for all users.
  • Cookies and session time expiration issues fixed: The new firmware handles the session expiration more gracefully, allowing smoother operations.
  • Cloning corrections: Some rare occurrences caused the cloning to skip specific parameters. The issues are now fixed, and the firmware is cleaner. Switching is also slightly faster. 
  • v1.02 - Current version. Addresses Cookies, Session timeouts, and switching features while implementing new functionality and higher performance.
  • v1.01 - Initial Fw release.
For further information or any questions, contact us at techsupport@terrasatinc.com

IBUC 2 | 2e | 2G | R | G 

For serial numbers beginning with TE70 & TE50 only.

Version: V1_58

Release Date: April 23rd, 2018

Update

N/A

  • SNMP 10MHz source to display correctly whether Internal/External.  

New Update available!

RX 1:1 Receiver

For serial numbers beginning with TERX only.

Version: V1_08

Release Date: May 6th, 2024

Update
  • Compatibility with newer types of LNBs: The LNB low current threshold is reduced to 50 mA.
  • N/A

RX 1:1 Receiver

For serial numbers beginning with TE60 only.

Version: V0_27

Release Date: May 19th, 2020

Update

N/A

N/A

Need Assistance?

Tech Support